First try on 15.1.2019

The Celestron SkyPortal WiFi module is a good thing. Unfortunately, it did not work. I could not connect. Even after a barter against a new device, it did not work. Probably there is some strong source of interference nearby which disturbs the WiFi when the telescope is in the observation area. In the garage, it works properly. But I will analyze this problem later.

So I did the 2-star alignment with the hand controller. Finally I could look at a few objects:
- Mars
- Moon
- Orion Nebula
- Andromeda Galaxy

However, apart from the Andromeda galaxy, the GoTo was pretty bad and the objects were not visible in the eyepiece. I always had to correct a bit.

I tried to make some fotos. The seeing was not very good, so I could not take a good picture of Mars.

Even the Orion Nebula was not really useful, as shaken by the vibrations when triggered the image. But the goal was only to check the exposure rates until the nebula is visible on the foto, so that worked.

The moon was reasonably acceptable. Here is one of the first pictures after over 30 years:

Comments

Popular posts from this blog

Starizona HyperStar 11 V4

22nd of March 2019

ZWO ASI 6200 MC Pro First light